Ladies Silk Blend Socks

Ladies' silk blend socks utilize 200N DC double-cylinder knitting construction with cylinder density of 200 needles per inch. Fabric comprises 58% Lyocell, 27% polyester, 5% mulberry silk, 4% spandex, 3% nylon, and 3% metallic yarn. Lyocell and mulberry silk provide moisture absorption, breathability, and smooth hand feel; polyester enhances dimensional stability; nylon improves abrasion resistance; spandex delivers stretch recovery; metallic yarn generates visual luster. Size 9-11 covers foot length 23-25cm. Over-the-knee height extends above the knee, adapting to skirt or shorts-wearing scenarios.

Core Advantages

Tactile and Visual Properties: Lyocell fiber surface smoothness exceeds cotton with a friction coefficient of 0.18-0.20, combined with a mulberry silk sericin layer to reduce skin contact resistance. Metallic yarn embedded as a core-spun yarn generates soft reflection at 300-600lux illumination without a continuous metal film, causing prickling.

Humidity Regulation: Lyocell moisture regain 13% and mulberry silk 11% form an absorption gradient, maintaining foot microenvironment relative humidity at 55-60%. Polyester core accelerates outward moisture transmission, shortening drying time by 35% versus pure cotton.

Structural Durability: 27% polyester content controls washing dimensional change within 2%; 3% nylon concentrates at toe and heel friction zones, achieving Martindale abrasion resistance above 8000 cycles. 200N fine knitting creates a compact loop structure, reducing snagging probability.

Anatomical Fit: 4% spandex provides 20-25% longitudinal and 15-18% lateral stretch, accommodating thigh circumference 45-55cm, individual variations. Over-the-knee height with ribbed cuff maintains position stability during walking, with slippage controlled at 3cm per 6 hours.

Technical Specifications

Gauge: 200N DC (double-cylinder circular machine)
Fiber Composition: 58% Lyocell / 27% Polyester / 5% Mulberry Silk / 4% Spandex / 3% Nylon / 3% Metallic Yarn
Size Range: 9-11 (foot length 23-25cm, thigh circumference 45-55cm)
Fabric Structure: Double-cylinder double layer, inner smooth, outer dense
Length Specification: Over-the-knee (5-10cm above knee)

Cuff Structure: Wide double-layer rib, 4cm width, pressure 3.2-3.8kPa
Heel Design: Y-shaped contoured heel pocket, nylon content increased to 8%
Toe Closure: Hand-linked, seam thickness ≤0.8mm
Metallic Yarn Distribution: Vertical fine stripes or scattered dots, diameter 12-15μm

Application Scenarios

Formal Events: Over-the-knee height ensures thigh coverage when the kirt hem rises during sitting. Metallic yarn sheen presents understated luster in banquet hall lighting, coordinating with silk or wool skirt materials.

Daily Commute: Lyocell and mulberry silk moisture combination supports all-day wear, delaying foot stuffiness onset by 3-4 hours versus synthetic fiber socks at 60% relative humidity. The polyester component reduces knee creasing after prolonged sitting.

Seasonal Transition: 200N double-layer structure forms an air layer thickness of 0.5-0.8mm, providing base insulation at 12-18°C ambient temperature, maintaining coolness above 20°C through fiber moisture wicking. Over-the-knee design minimizes skin exposure between the skirt and footwear.

Light Social: Metallic yarn visual element adapts to evening indoor activities, creating material contrast with high heels or ankle boots. Over-the-knee height modifies leg line appearance; rib structure generates longitudinal visual extension.

Care & Maintenance

Wash at temperatures not exceeding 30°C, using neutral detergent pH 6-7. Lyocell wet strength decreases approximately 30%; avoid wringing forcefully. Mulberry silk protein composition is vulnerable to alkaline damage—soap products dissolve sericin.

Turn it inside out and use a laundry bag to reduce mechanical friction. Separate dark and light colors; Lyocell may exhibit slight color bleeding in initial washes. Avoid washing with rough surfaces or hook-and-loop fasteners that cause metallic yarn breakage or fuzzing.

Dry flat in a shaded, ventilated area; avoid hang-drying, which causes longitudinal shaft stretching. Direct sunlight triggers mulberry silk protein denaturation, fiber embrittlement, and metallic yarn surface oxidation. Drying time is approximately 4-6 hours, 40% shorter than cotton.

Iron at temperatures not exceeding 110°C; steam ironing restores smoothness, avoiding direct contact with metallic yarn areas. Store folded flat long-term with cuff pressure-free. Place moth repellent wrapped in paper to prevent naphthol contact with mulberry silk.

Pre-wash separately before first wear to remove textile sizing residues. Slight tactile sensation at metallic yarn edges is a normal physical phenomenon; fiber fuzz subsides after several wears. Avoid snagging with nails or jewelry—200N fine structure has limited repair capability.

Frequently Asked Questions

What is the specific structure of a 200N DC double-cylinder?
A double-cylinder consists of inner and outer needle sets—inner cylinder knits fabric inner layer, outer cylinder knits outer layer, both connected through binding yarn. Enables differentiated design with a soft inner layer and dense, abrasion-resistant outer layer. Metallic yarn is typically placed in the outer layer to minimize direct skin contact.

What is the basis for 5% mulberry silk and 58% Lyocell ratio?
Mulberry silk fiber fineness 9-11dtex, tenacity 2.5-3.0cN/dtex—excessive content reduces fabric durability. 5% content concentrated at the yarn surface improves hand and luster. Lyocell as a base provides moisture absorption and strength balance at 60-70% lower cost than mulberry silk.

How to address over-the-knee sock slippage?
Slippage usually results from insufficient cuff pressure or thigh circumference below the design minimum. Measure thigh circumference at mid-point in relaxed state; if below 45cm, consider styles with silicone grip strips or use with garter belts. Avoid fabric softener on cuffs—silicone oil reduces rib friction.

Is metallic yarn conductive or uncomfortable?
Metallic yarn is an insulated polyester film with aluminum coating, resistivity above 10¹²Ω·cm, generating no static accumulation. At 3% content with dispersed distribution, skin contact area is limited. For metal sensitivity, select styles with metallic yarn only in outer layer.

Component
58% Lyocell
27% Polyester
5% Silk
4% Elastane
3% Polyamide
3% Lurex